
Siding Contractor in Rockland, ME
Kenneth Cox Construction is the siding contractor in Rockland, ME that finds out what is on your house before quoting to take it off, because most places in this city are wearing more than one exterior.

- 38 years in business, since 1988
- Over 250 projects completed
- Affordable work, two-year written warranty
Most houses in Rockland are wearing more than one exterior. Original clapboard, a mid-century asphalt or cement shingle layer, then vinyl over the top: that stack is normal here, and the layer nobody expected is usually the third one down.
That is why the price depends on what the first probe finds. Cement shingle from that era can contain asbestos, so it gets tested and handled by an abatement contractor instead of pried off with a bar. Ken opens the wall, looks, then prices the real job.
Penobscot Bay air is hard on fasteners and finishes, so what goes back on the house matters as much as what comes off. Kenneth Cox Construction has been doing this work since 1988, and the finished siding carries a two-year workmanship warranty in writing.

Why Rockland Residents Hire Us for a New Siding
Kenneth Cox Construction has been in business since 1988, and our reputation in Knox County rests on numbers that hold once the wall is open.
Our accreditation with the BBB can be checked in a minute, and the two-year workmanship warranty arrives in writing. Ken is the one who explains any change before it happens.
Get a siding estimate for your Rockland home
Tell us what is on the house now and what you want on it. Takes about a minute.
What other contractor services do we offer in Rockland?
Which towns around Rockland do we serve?
Where is our shop?
Directions from Rockland, ME to our shop in Searsmont
128 New England RoadSearsmont, ME 04973
What Siding Services Do We Offer in Rockland?
The list below separates a complete wall repair from a surface-only installation and makes the work behind the siding visible in the estimate. In Rockland, we use the inspection to decide whether one elevation, the trim and openings, or the whole exterior belongs in the first phase.
- sheathing inspection and repair
- water-resistive barrier and flashing installation
- vinyl siding installation and replacement
- fiber-cement siding installation and replacement
- engineered-wood siding installation and replacement
- wood and cedar siding installation and replacement
The drainage plane and openings must be corrected first, because an inexpensive surface over a wet wall is not a savings. The final recommendation for a Rockland house follows the exposure and the condition found at tear-off, not whichever sample carries the largest price tag.
What is our siding process in Rockland?
Get your free quote
Ken checks what layers are present, tests where it is warranted, and prices removal and replacement as separate lines.
We bring your project to life
Material comes off in a planned order, anything requiring an abatement contractor is handled correctly, and the site is cleared daily.
Enjoy your new space
The house sheds a century of patchwork and gets one exterior that was designed as a whole.

Why hire us as your siding contractor in Rockland, ME?
Homeowners hire us as their siding contractor in Rockland, ME because we know what the layers are before we quote them. This city built dense and then economized for a century, so a typical downtown or north end house carries original clapboard, an asphalt or cement shingle layer from mid-century, and vinyl over the top.
Each layer was somebody's affordable answer at the time. Together they add weight, trap moisture, and make any honest quote depend on what the first probe finds.
Older cement shingle in particular changes the plan, since material of that era can contain asbestos and has to be tested and handled by an abatement contractor rather than pulled off with a bar.
Since 1988 we have opened up a lot of Rockland walls. Two layers is normal here, three is common, and the third one down is often something nobody expected.
Ken does the investigating and the pricing, and our finished work carries a 2-year workmanship warranty from a BBB accredited company.

We take on owners of the dense downtown Rockland stock, the sea captain houses on the north end, and the postwar places out toward Owls Head, and most of them have owned the house long enough to be curious about what is under it.
Landlords call us too, usually because a layered wall has finally started leaking into a unit and patching it has stopped working.
Removal actually involves more care here than a tear-off elsewhere. We test where the material warrants it, plan disposal properly, and take the layers off in order rather than all at once so the house is never open more than it needs to be.
Underneath, the original clapboard is often in better condition than anything covering it, and the sheathing tells us in an afternoon what the rest of the job will cost.
We work across the whole of Rockland, from the Main Street blocks and the harbor side to the residential streets running back from the water and out toward Thomaston and Owls Head.
Downtown lots are tight enough that staging, parking and a dumpster all have to be worked out before we start, which is a conversation we prefer to have during the estimate.
Rockland work should be booked for May into October, because removal wants dry weather and a settled forecast. Anything involving testing needs lead time on top of that.
If a wall is leaking now, we will stabilize it in any season and schedule the full job properly rather than rushing a bad November tear-off.
Rockland exteriors are harder than they look because of the layers, and those are the reason a quote given from the sidewalk here is worth very little.
Salt is the second. Full bay exposure works on fasteners and finishes hard, and every one of those historic layers was fixed on with whatever was cheapest at the time.
Ledge and lot size are the third. Shallow ledge and tight urban parcels limit where we can stage and where material can be stored, and both cost hours.
Ask what they will do if they hit cement shingle, and listen for whether testing is mentioned. That answer tells you how the rest of the job will be handled.
Then ask where the debris is going and how the site gets cleaned each day. On a lot this size, that is your neighbors' experience of the project as well as yours.
Disposal and labor drive the number more than the new material does, and a wall carrying three layers costs meaningfully more to strip than a wall carrying one.
We price the investigation, the removal and the new exterior as separate stages so you are never asked to approve a figure that was really a guess.
What do Rockland homeowners ask about siding?
How do I know if my old shingles contain asbestos?
You know whether your old shingles contain asbestos by testing, which is the only reliable way. The EPA guidance explains why material of that era should not be disturbed first and identified afterward, so we arrange it as part of the estimate.
Do I need a permit to re-side in Rockland?
You usually do not need a permit to re-side in Rockland, though harbor-side properties carry shoreland requirements and structural repair is treated differently. We confirm it with the city code office first.
Is it cheaper to leave the old layers on?
It is cheaper to leave the old layers on today and not over the life of the wall. Trapped moisture is what shortens everything installed over the top of it, which is the whole problem, because trapped moisture is what shortens everything installed over the top of it.
Can you work on a lot with no parking?
We can work on a lot with no parking, and we do it regularly downtown. Staging, deliveries and disposal get planned around the street before the first day rather than during it.

How do you start a Rockland project?
You start a Rockland project by finding out what is on the wall. If you have owned the house for years and nobody has ever told you, that is worth an afternoon of somebody's time.
Ken will come and find out, at no cost and with no obligation. Call him on 207-386-9235.






